By The Home Air Guide
Start with what you need to reduce
Smoke, dust and pollen CADR figures describe the delivery of air cleaned of specific test particles. They are not a measure of how much odor or gas a cleaner removes. The EPA explains that indoor pollutants can be particles or gases, and that no air cleaner removes every pollutant. Identify the problem first and continue to control its source and ventilate with cleaner outdoor air when appropriate.
Use a particle rating for a particle question
Imagine a 12 × 10 ft room with an 8 ft ceiling. At the room calculator’s illustrative setting of 4.8 clean-air changes per hour, 960 cubic feet × 4.8 ÷ 60 gives a smoke-particle target of 76.8 cfm, rounded up to 77. A unit with a documented 80 cfm smoke CADR meets that nominal arithmetic target at its rated test setting. This invented example is not a measurement of your room, a gas-removal result or a promise of reduced exposure.
Treat an odor claim as a different question
The EPA says activated carbon and other sorbent media can remove some gases, with effectiveness depending on the material and application. It also notes that portable gas-cleaning filters lack a widely used performance rating comparable to particle CADR. A carbon layer or a high smoke CADR alone does not quantify removal of a particular gas, tell you when a filter is exhausted or show that every odor-causing compound is captured. Ask the manufacturer for the target gas, test conditions and replacement guidance; leave an unsupported comparison unresolved.
Check ozone separately
EPA advises avoiding devices that intentionally generate ozone; ozone irritates the lungs. Its wildfire guidance recommends checking the California Air Resources Board’s certified-device list. CARB says its certification addresses electrical safety and, for electronic devices, an ozone-emission limit; it does not rate pollutant-removal effectiveness or guarantee health safety. Search the exact brand and model, then check the separate smoke CADR and manual rather than treating certification as an air-cleaning score.
Use the room target as one part of a plan
Check the exact unit’s rated speed, how much noise you can tolerate, placement and replacement filters. The published CADR is typically measured at a high setting, and lower settings can filter less air. Open doors, imperfect mixing and changing filter condition also limit a single-room estimate. During wildfire smoke or other local events, follow the relevant public-health guidance rather than relying on this calculator as a safety determination.
Keep a useful purchase note
For each exact model, record the smoke CADR and source, the room target and chosen setting, the filter part number and any gas-specific evidence. Mark gas performance or lower-speed CADR as unknown if the maker has not documented it. The comparison can still help you choose what to investigate next without turning a missing specification into zero or an unverified promise.
Sources
- US EPA: Guide to Air Cleaners in the Home — particles, gases and ozone; checked 18 November 2026 ↗
- US EPA: indoor air filtration during wildfire smoke — technology and room sizing; checked 18 November 2026 ↗
- California Air Resources Board: certified air cleaning devices and certification limits; checked 18 November 2026 ↗