ROOM STUDY 03 / OUTLET MEASUREMENTS
Read your purifier’s power log.
Compare two meter readings even when they cover different lengths of time. Use one sample for a quick estimate, or add a second to compare schedules.
The starting figures are a worked example, not test results or a quote. Replace them with your meter readings and electricity rate.
Record two samples
Use the kWh accumulated during each sample and the elapsed time for that same sample, including any idle time you want represented.
NORMALIZED TO 24 HOURS
Compare the readings
| Estimate | Sample A | Sample B |
|---|---|---|
| Daily energy | 0.42 kWh | 0.27 kWh |
| Average draw | 17.5 W | 11.25 W |
| Annual energy | 153.3 kWh | 98.55 kWh |
| Annual cost | $30.66 | $19.71 |
| 3-year cost | $91.98 | $59.13 |
Sample B uses 54.75 kWh less per year in this projection.
Projections assume the sample pattern repeats for 365 days each year. Costs cover electricity only. A lower reading doesn’t establish equal smoke CADR or room coverage.
How to collect useful readings
Follow the meter and purifier manuals and stay within their electrical ratings. Start each log with a known initial kWh value and record the difference after a representative period. Include any overnight mode, idle time or automatic speed changes that are part of the routine you want to compare.
Divide kWh by elapsed hours and multiply by 24 for daily energy. If the purifier uses Auto mode or the room schedule changes, log representative days before treating a short measurement as typical.
References: U.S. Department of Energy: electricity and kWh · P3 P4400 meter manual (PDF)