EDITORIAL DESK
Sources & methods
Every catalog entry shows where its smoke CADR and filter information came from. Here’s how we turn those figures into a comparison.
How room fit is calculated
For a rectangular room, volume is length × width × ceiling height. Convert to cubic feet where needed, multiply by the chosen clean air changes per hour, divide by 60 and round up to a whole cfm. A model meets the tool’s target if its published smoke CADR equals or exceeds that whole-number target. Rated air changes per hour reverse that calculation before display rounding.
The default 4.8 clean air changes per hour is a comparison setting. At an 8 ft ceiling it is close to the EPA wildfire particle filtration sizing guide of at least two-thirds of the floor area in square feet as smoke CADR in cfm. Follow applicable official guidance during smoke events. A single-room estimate does not account for mixing, open doors, filter loading, gases or real-world exposure.
Where ratings and codes come from
We use manufacturer US product documents or the exact model’s ENERGY STAR Product Finder record. Linked archived records do not establish current certification. When a figure differs between sources, the catalog entry explains the choice. Manufacturer listing, manual or storefront record supplies filter compatibility and codes; missing codes are marked in the Filter Finder.
Catalog snapshot
Our comparison is a curated set with documented filter compatibility. The separate normalized EPA dataset (JSON) contains 248 ENERGY STAR V3.0 records retrieved . It preserves the agency’s reported ratings and ESUIDs and does not infer filter compatibility or current retail availability. See the source dataset, product data resources and reporting criteria.
Combining multiple units
The combination calculator adds independently published smoke particle CADR values for units running at their rated speeds in one well-mixed room. This yields nominal airflow and air changes. It does not combine rooms or use VOC chamber figures.
How the three-year estimate works
Electricity = listed watts ÷ 1,000 × hours per day × 1,095 × your USD/kWh rate. This assumes continuous draw at that listed wattage during the hours you enter. The listed smoke CADR and power figures do not establish performance or power draw at a particular lower fan setting.
Filters = the number of replacement sets purchased before month 36 × your quoted set price. We assume one set is included with the purifier at month zero. Where the maker documents an interval range, the calculator varies the number of sets using the two ends of the range. It shows a combined estimate only when both inputs are available. The cost sort uses the low end of complete estimates.
Limits and corrections
This is a small US catalog assembled from documents, with no independent unit testing or live stock and price feed. Use it to draw up a shortlist, then recheck the exact part and current price with the manufacturer.