01 / ROOM SIZE

Read the smoke CADR number

Compare airflow for particle removal at the same room volume and air-change target.

By The Home Air Guide

Start with the full room volume

Measure from wall to wall and from floor to ceiling. For a rectangular room, multiply those three measurements. For an L-shaped room, add the volumes of its rectangular parts. If the room opens into another space, a simple single-room estimate is less reliable.

Use the smoke column

A specification sheet may list separate values for smoke, dust and pollen. Compare smoke CADR with smoke CADR. The number is expressed here in cubic feet per minute (cfm). Multiply your room volume in cubic feet by your chosen clean air changes per hour, then divide by 60.

Check speed before buying

A published CADR is a rating, not a reading from your room. If a lower speed is the only one you’ll run, look for a separately documented CADR at that speed. Follow the placement guidance for the appliance and leave openings clear.

Try two ceiling heights

A 16 × 12 ft room with an 8 ft ceiling needs about 123 cfm at 4.8 clean air changes per hour. The same footprint with a 10 ft ceiling needs about 154 cfm when rounded up.

Sources

The Home Air Guide

Air Notes

Practical notes on sizing, filters and running costs. Signups are closed.